Connector; Types; Making Connections; Antenna - Sony KP-43T90 Operating Instructions Manual

I
' Installing and Connecting the Projection TV (continued)
Connector Types
You may find it necessary to use some of the
following connector types during set up.
Coaxial cable
Standard TV cable and antenna cable
CONTROL S cable
Sonv cable for CONTROL S connection. This
feature is exclusive to Sony products and
allow greater control of all Sony equipment.
m * @ Push into connection.
Plug Type
a
Push into connection.
About the CONTROL S OUT jack
Screw-on Type
m$-+
To control other Sony equipment with the
Screw into connection.
projection TV's remote control, connect the
CONTROL S IN jack of the equipment to the
S Video cable
CONTROL S OUT jack on the projection TV
High quality video cable for enhanced
with the CONTROL S cable.
(Rear of projectiw TV)
Audio/Video cable
a Push into connection.
Video - Yellow
Audio (Left) - White
Audio (Right) - Red
Some DVD Players and DTV Receivers are
equipped with the following three video
connectors.
Y - Green
PB
(CB,
Cb or B-Y) - Blue
$ PR
(CR, Cr or R-Y) - Red
Making Connections
Connecting directly to a cable or
an antenna
The connection you choose will depend on
the cable found in your home. Newer homes
will be equipped with standard coaxial cable
(see
A);
older homes will probably have 300 -
ohm twin lead cable (see
B);
still other
homes may contain both (see C ).
Use 75-ohm coaxial cable for improved
picture quality (see
A).
A
35ohm
(Rear of
l
VHF only
coaxial cable
projection TV>
or
l
VHF/UHF
or
l
Cable
B
I ,F ,-* ?^ y .i i
Q .SieCE+i! -:
l
VHF only
or
l
UHF only
or
l
VHF/UHF