Sony KP-43T90 Operating Instructions Manual page 32

J Using the Audio Menu
Audio
Treble -
sass
Balance
=t=
MTSISAP. stereo
Steady Sound: on
Effect: Surround
Speaker: On
Audio Out: Variable
SAV.4 SP Control
3
Move 1. Select9 End m
>
Sliders
For detailed information on using the remote
control to modify menu settings, refer to
"Learning Menu Selection" on page 25.
To select the Audio B$, menu:
D!sp!ay * Highlight b I) Select
MEN"
73
To restore the factory settings
Press RESET on the remote control while the
Audio menu is selected.
* The BBE is manufactured by Sony Corporation
under license from BBE Sound, Inc. It is covered
by U.S. Patent No. 4,638,258 and No. 4,482,866.
The word "BBE" and the BBE symbol are the
trademarks of BBE Sound, Inc.
Treble
Sound adjustment
Bass
Sound adpstment
Balance
Sound adjustment
MTWSAP
Enjoy stereo.
bhgual and mono
programs
Adjust slider right (up) to increase high pitched sounds.
Adjust slider left (down) to decrease high pitched sounds.
Adjust slider right (up) to increase low pitched sounds.
Adjust slider left (down) to decrease low pitched sounds.
Adjust slider right (up) to emphasize right speaker volume.
Adjust slider left (down) to emphasize left speaker volume.
When the sound is intermittent due to poor reception conditions, select "Stereo"
or "SAP."
Stereo: Select for stereo reception when viewing a program broadcast in stereo.
SAP: Select to listen to a bilingual broadcast. (non-SAP programs will be muted
when this feature is selected)
Mono: Select for mono reception. (use to reduce noise during stereo broadcasts)
Auto SAP: Select to listen to SAP when a SAP program is broadcast and return
to stereo reception automatically for non-SAP programs.
Quick MTS access: Press MTe on the remote control to cycle through the
"MTSLSAP" options as follows: Stereo - SAP - Mono - Auto SAP.
Steady Sound
Ad/usf !!?e sowid
ieve,
On: Sound output coming from TV speakers have the volume level equalized for all
channel audio inputs when broadcasts have different sound transmission levels.
Off: Sound output coming from the TV speakers varies according to the received
channel.
Effect "Effect" can only be set when "Speaker" is set to "On" or "Off."
CL/s:omires BBE*: Centers the sound intensity to the front, creating an effect as if you were
sLr//ourK/ soux? seated in front of an orchestra.
2r&rs L;as&?:: c,- !?5 Surround: Simulates sound with the atmosphere of a movie theater or a concert
lJ-cg,'~;?:!? s i-L.>?
hall for stereo programs.
;ipe Simulated: Adds a surround-like effect to mono programs.
Off: Normal stereo or mono reception.
Quick Effect access: Press @ on the remote control to cycle through the
"Effect" options as follows: EBE - Surround --+ Simulated - Effect Off.
I . . 1% -..
(contznuea~ L,