Connecting A Cable Tv System; Antenna To A Vcr; Connecting A Vcr And Projection - Sony KP-43T90 Operating Instructions Manual

': Installing and Connecting the Projection TV (continued)
Connecting a cable TV system/
Disconnect all power sources before making any connections.
(Rear of proiection TV)
antenna to a VCR
Attach the coaxial cable from the
incoming cable connection or antenna to
VHF/UHF IN on the VCR.
Using a coaxial cable, connect VHF/UHF
OUT on the VCR to VHF/UHF on the
projection TV.
Coaxial cable
Using AUDIO and S VIDEO* cables,
connect AUDIO and S VIDEO OUT on the
VCR to AUDIO and S VIDEO IN on the
projection TV (White-AUDIO Left, Red-
AUDIO Right**).
Connecting a VCR and projection
TV to a cable box
(Rear of projection TV)
I Coaxial cable _
Connect the single (input) jack of the
splitter to the incoming cable connection,
and connect the other two (output) jacks
(using the coaxial cable) to IN on the cable
box and VHF/UHF on the projection TV.
Using a coaxial cable, connect OUT on the
cable box to VHF/UHF IN on the VCR.
Using AUDIO and S VIDEO" cables,
connect AUDIO and S VIDEO OUT on the
VCR to AUDIO and S VIDEO IN on the
projection TV (White-AUDIO Left, Red-
AUDIO Right*").
Ml I -1
-
Cable/
Antenna
Cable!
Q
/(not supplied)
I