Sony KP-43T90 Operating Instructions Manual page 20

d Installing and Connecting the Projection TV (continued)
Connecting an audio system
For more dynamic sound, connect an audio
system to the projection TV.
Disconnect all power sources before making any connections.
(Rear of projection TV)
Set the stereo to the chosen Line input
and use the Audio menu to set the audio
output and switch the TV's speakers off.
(see "Audio Out" and "Speaker" on page
28)
Note:
l
You can adjust VOLUME, "Bass,"
"Treble, " "Balance, " "MTS/SAP" and
"Effect" with the supplied remote control.
The control items except VOLUME
can
be
adjusted only when "Audio Out" is set to
"Variable" in the Audio menu. (see
"Audio Out" on page 28)
AUDIO-R
RK-74A
, . .
wm
(not supplied)
Using an AUDIO cable, connect AUDIO
(VAR/FIX) OUT on the projection TV to
one of the unused Line inputs (e.g. Tape-
2, AUXl, etc.) on the stereo.
Stereo amplifier