Sony KP-43T90 Operating Instructions Manual page 29

I
Using Your New Projection TV (con timed)
and ENTER
Press to select the TV channel
displayed. (for details, see
'Wa
Speed surf
1 Press and hold CH + or-to change the channel number rapidly.
REFER TO THE
ILLUSTRATION OF THE
REMOTE CONTROL ON THE
INSIDE FRONT COVER OF
THIS MANUAL AS YOU
REVIEW THIS CHART
2 Release to display the desired channel.
Note:
Press to change between the VHF/UHF input and the AUX input for the picture on
which the symbol "+I' (or "4') is displayed.
AUDIO
0
Press to alternate sound between the main picture and the window picture. The
symbol "J" will appear for a few seconds to indicate which picture's sound is being
received.
FREEZE
0
This is useful when you need to copy down information of the main picture.
Press to freeze the desired scene in the main picture. The frozen picture is displayed
in the window picture while viewing the normal picture in the main picture. The
window picture size is automatically changed to l/9 if it was l/16.
Press again to resume normal PIP viewing.
SWAP
0
Press to switch the audio and video of the main picture and the window picture.
Each time you press SWAP, the picture and sound of the two will be exchanged.
l
If one of the pictures received through
PIP is snowy, the entire screen may
become unstable. In this case, erase the
snowy channel. (see "Channel Skip/
Add" on page 31)
I
I ,