Pride CELEBRITY XL DELUXE Owner's Manual page 33

V I . C O M F O R T
MIRROR POSITION
To install the mirror (see figure 18):
1. Determine a side to install the mirror and remove
the rubber plug from the top of the tiller handle.
2. Insert the threaded end of the mirror holder into the
opening and rotate it clockwise until snug.
3. If necessary, rotate the nut clockwise to secure the
mirror in place.
To adjust the mirror:
1. Position yourself in a seated driving position facing
forward.
2. Adjust the mirror left, right, up or down until you
have a good line of sight behind you.
POSITIONING BELT (OPTIONAL)
Your scooter seat may be equipped with an auto-type
positioning belt that can be adjusted for operator com-
fort. See figure 19. The positioning belt is designed to
help support the operator so that he/she does not slide
down or forward in the seat. The positioning belt is not
designed for use as a restraining device.
To install the positioning belt (if required):
1. Remove the seat from your scooter.
2. Place the seat upside down so that you can see the
bottom of the seat base.
3. Remove the two bolts on the outermost part of the
rear seat mounting strap.
4. Insert the bolt through the appropriate end of the
positioning belt and then through the seat mounting
strap for each side of the scooter seat.
5. Tighten the bolts.
To adjust the positioning belt for operator comfort:
1. Insert the metal tab on the right side of the belt into the plastic housing on the opposite strap until you hear a
"click."
2. Pull the strap on the right side of the belt until it is secure, but not so tight as to cause discomfort.
MANDATORY! Make sure the positioning belt is properly secured to the scooter and is
adjusted for operator comfort.
MANDATORY! Inspect the positioning belt for loose or damaged parts before each use of
the scooter. If you discover a problem, contact your authorised Pride Provider for
maintenance and repair.
Celebrity XL Deluxe
A D J U S T M E N T S
Figure 18. Mirror Installation
Figure 19. Positioning Belt
www.pridemobility.com
MIRROR HOLDER
PLUG
NUT
33