Reports; Menu Settings Page; Event Log; Panel Menus - Lexmark X543 Service Manual

7525-xxx
Uses an algorithm to compensate for mechanical incorrect registration in the printer. When small black text or
fine black lines are being printed, the printer checks to see if they are being printed on top of a colored
background. If so, rather than remove the color from beneath the black content, the printer leaves the color
around the edge of the text or line. The hole in the colored region is reduced in size, which prevents the
characteristic white gap that is caused by incorrect registration.
Values include Off and numbers 1–5 (the default is 2). Values 1 through 5 indicate the amount of color
remaining beneath the black content. The default is each setting increments by 1/600 of an inch. The more
inaccurate the registration setting, the higher the setting needs to be adjusted. Selecting Off disables color
trapping.

Reports

Menu Settings Page

Print the menu settings pages to list the customer settings and to verify printer options are installed correctly. It
is helpful to print the customer settings before you restore factory defaults or make major changes.
To print the menu settings:
Select Reports from the Config Menu, and press Select (
1.
2. Select Menu Settings Page, and press Select (

Event Log

Lets the system support person print a limited set of the information contained in the Diagnostics Menu version
of the printed Event Log. For a sample of a printout, see
log and the full Diagnostics log printed versions show the same operator panel messages when they print and
follow the same layout guidelines.
To print the event log:
1. Select Reports from the Config Menu, and press Select (
Select Print Log, and press Select (
2.

Panel Menus

Lets the system support person enable or disable the operator panel menus. Selecting On (the default) allows
users to change values for the printer. Off disables the users' access to menus. If a user presses Menu (
they receive a message that the panel menus are locked. When set to Off, this setting restricts all menu access,
even to menus or items set for PIN access. However, when set to On, all PIN restrictions are in restored.
This menu item appears only when the PJL PASSWORD Environment variable is set to 0.

PPDS Emulation

Activates or deactivates the Personal Printer Data Stream (PPDS) emulation language. This menu item appears
only if the PPDS interpreter is available.
Service Manual
3-32
).
).
"Event Log" on page
).
) to begin printing the log.
3-23. The limited Configuration
),
Previous
Next
Go Back