Pride Sundancer Owner's Manual page 25

V I I I . D I S A S S E M B L Y A N D A S S E M B L Y
10. Grab the handle grip on the tiller, push down on the release lever, and gently lower the tiller down to the center
of the Sundancer chassis until it is fully lowered.
11. Push the cam locks forward and remove the ball detent pins. See figures 18 and 19.
12. Separate the front section from the rear section. See figure 20.
Figure 15. Unplug the Battery Harnesses
Figure 17. Disconnect the Motor Harness
Figure 19. Remove Ball Detent Pins
Sundancer
Figure 16. Lift Batteries Off Scooter
Figure 18. Push Cam Locks Forward
Figure 20. Separate The Front and Rear Section
25