Adjusting The Interior Fittings; Adjusting The Door Shelf / Bottle Shelf; Moving The Bottle Holder; Adjustable Shelf / Adjustable Shelf With Lighting - Miele KFNS 37432 iD Operating Instructions Manual

Adjusting the door shelf /
bottle shelf
^ Lift up the bottle shelf / door shelf
and pull it towards you to remove it.
^ Replace the shelf at the required
height. Ensure that it is securely
pushed back into position.

Moving the bottle holder

The bottle holder can be moved left or
right, thus creating more room for drink
cartons.
The bottle holder can be removed
completely, e.g. for cleaning.
^ Lift up the bottle shelf and pull it
towards you to remove it.
^ Detach the bottle holder from the
back edge of the bottle shelf.

Adjusting the interior fittings

Adjustable shelf / Adjustable
shelf with lighting
The LED lighting is located on the
stainless steel trim of the adjustable
shelf.
By adjusting the position of the shelf in
the refrigerator section, you can
change the illumination in this section
according to your needs.
If the lighting does not work, check
that the shelf is correctly positioned
in the shelf supports:
The adjustable shelf has metal discs
(contacts) on the front left corner to
enable electricity to be supplied to
the LED lighting. When inserting the
shelf, ensure the contacts click into
position in the shelf support.
Moving the adjustable shelf /
adjustable shelf with lighting
The shelves can be adjusted according
to the height of the food.
^ Raise the shelf, and pull it forwards
slightly until the notch at the side is in
line with the shelf support. It can then
be raised or lowered to the required
level.
The raised edge at the back must face
upwards to prevent food from touching
the back of the appliance and freezing
to it.
41