Miele KFNS 37432 iD Operating Instructions Manual page 66

Information for Miele Centers and Chartered Agents
Switching off Demo mode
The r is illuminated in the display.
^ Touch the settings sensor.
All symbols that can be selected
appear in the display and the 0 symbol
flashes.
^ Touch the sensors for setting the
temperature (X or Y) repeatedly until
the symbol for the r flashes in the
display.
^ Touch the OK sensor to confirm your
selection.
1 flashes in the display (Demo mode is
active) and the r symbol is illuminated.
66
^ Touch the X or Y sensor so that 0
appears in the display (Demo mode
is inactive).
^ Touch OK to confirm your selection.
The setting is saved and the r symbol
flashes.
^ Touch the settings sensor to leave
settings mode.
Otherwise, the electronics will leave
settings mode automatically after
approx. one minute.
The Demo mode is switched off and the
r symbol disappears.