Before Installation - Miele KFNS 37432 iD Operating Instructions Manual

Installation advice

Before installation

^ Before installation, remove the
accessories bag containing
installation components and
accessories from the appliance, and
remove the sealing strip from the
appliance door.
^ Do not remove the following from the
rear of the appliance:
– The spacers (depending on model).
These ensure the gap required
between the back of the appliance
and the wall is maintained.
– The bags (depending on model)
located inside the metal grille (heat
exchanger).
These are important for the correct
functioning of the appliance. Their
contents are non-toxic and are not
dangerous.
^ Remove any cable clips from the
back of the appliance.
^ Check that all parts at the back of the
appliance are unhindered. Carefully
remove any hindrance.
70
^ Open the appliance door and remove
the red transport clips a (depending
on model).