Miele KFNS 37432 iD Operating Instructions Manual page 79

^ Screw the fixing bracket d into the
pre-drilled holes in the appliance
door using the hexagonal screw e.
Securely screw the second pair of
fixing brackets d to the handle area
of the door. To do this, use the
pre-drilled holes in the appliance
door.
^ Push the appliance two-thirds of the
way into its niche.
When doing this, make sure that the
mains cable does not get trapped.
Installation tip:
Tie a piece of string around the plug to
"lengthen" the mains cable.
Then grab the other end of the string
and pull the mains cable through the
housing unit to make it easier to
connect the appliance to the electricity
supply after installation.
With 16 mm thick unit walls:
^ Clip the spacers b and c on the
right-hand side of the hinges.
^ Open both appliance doors.
Installation
79