CanyCom CM1801 Operator's Manual page 29

6
Aux. speed change lever
OPERATION
Blade clutch
lever
Blade height
adjusting lever
Low speed
Grass out-
let cover
4. Push blade clutch lever down slowly and push clutch into
"ON" position.
5. In accordance with your requirement adjust the height of the
cutter blade by controlling the blade height adjusting lever.
Blade height adjusting lever position
Transportation
5
4
3
2
1
6. Move accelerator lever into High position to increase engine
speed.
7. Move aux. speed change lever into Low speed mode and start
driving with lower speed. (Adjust speed in accordance with
operating conditions.)
8. When the work load is large (i.e. the amount of weeds is large),
carry out work by decreasing the speed or cut grass twice.
9. If grass outflow is not smooth, slightly open the right side of
the grass outlet cover.
Beware of stones or other objects which may
come of cutter blade area when opening the
grass outlet cover. Therefore, ensure the safety
completely.
Carry out the mowing operation in the forward
direction. Do not perform the operation in the
backward direction, because it makes grass
discharge poor and causes stones or other
objects to scatter.
– 24 –
Blade height
for transportation
75 mm
60 mm
45 mm
30 mm
15 mm
CAUTION
CAUTION