Blower Housing And Cooling Fan - CanyCom CM1801 Operator's Manual

7
Attaching bolt
Fuel tank
Remove dirt
or dust around
these areas
MAINTENANCE
4. Clean inside of filter pot, oil seal,fuel filter in clean
kerosene.
5. Attach filter pot, oil seal and fuel filter.
7.7.4

Blower Housing and Cooling Fan

Remove the blower housing after engine
becomes cool.
1. Remove all the fuel completely from fuel tank.
2. Remove cover in front part of fuel tank.
3. Remove attaching bolts (4 pcs.) for fuel tank.
4. Move fuel tank to forward position and fix it.
5. Remove blower housing fixing bolts and detach the
shroud.
6. Inspect cooling fins for dirt or dust. Clean with com-
pressed air.
– 40 –
CAUTION