Stopping Procedure - CanyCom CM1801 Operator's Manual

Low speed
Accelerator lever
Neutral
HST lever
Aux. speed change lever
Main switch
OPERATION

6.4 STOPPING PROCEDURE

1. Put the accelerator lever to "Low speed" position to decrease
2. Return the HST lever to "Neutral" position and stop the
3. Return the aux. speed change lever to "Neutral" position from
Neutral
4. Turn the starter switch to the "OFF" position.
OFF
5. Remove the key.
6. Depress the brake pedal fully and apply the parking brake
Parking brake
lock lever
Brake pedal
engine revolution speed.
machine.
In case of emergency depress the brake pedal.
The HST lever automatically returns to
"Neutral" position and stops the machine.
High or Low position.
Never leave the key in the "ON" position with
the engine. This may cause discharging of the
battery, because a current from the battery con-
tinues to flow to each circuit.
lock lever to lock the brake pedal.
– 20 –
N O T E
N O T E
6