Transportation Of/With This Vehicle - CanyCom CM1801 Operator's Manual

TRANSPORTATION OF/WITH THIS VEHICLE

10. TRANSPORTATION OF/WITH THIS VEHICLE
When loading and unloading the machine onto or from truck, follow the procedures below.
1. Prepare running boards with enough strength (durable to hold both machine and driver's weight), width (twice
width of tire width), length (more than three times as long as the truck loading body height), and abrasive sur-
face. Place the boards as shown below so that the boards firmly keep their positions even when the machine
rides on them.
2. Securely hook the running boards to truck so that there is no difference in height between the boards and the
truck's loading bed.
• Do not allow any one to come near the machine, truck, and
• Do not turn on the running boards. The machine may drop
• When moving up or down the running boards, drive the vehi-
When the machine is loading on the place between the truck
and the running board, beware of the machine's center of gravi-
ty because it may move suddenly.
Running boards
running board while loading or unloading the machine.
off the running boards.
cle slowly at low speed.
DANGER
CAUTION
– 53 –
10