Pioneer XY series Installation Manual page 60

5 Drive unit replacement
___________________________________________________________________________________________________________
5.1.2 XY-122/152
Part list
Grille
XY-122
Item Part Name
Grille
Grille
M6 countersunk bolt
XY-152
Item Part Name
Grille
Grille
M6 countersunk bolt
HF drive unit (XY-122/152)
Item Part Name
HF drive unit
M6 Stud bolt
Nut
Flat washer
HF
Spring washer
M6 countersunk bolt
LF drive unit
XY-122
Item Part Name
LF drive unit
LF M6 socket head bolt
Spring washer
XY-152
Item Part Name
LF drive unit
LF
M6 socket head bolt
Spring washer
Procedure (XY-122/152)
Removing and reinstalling the grille.
(1) Remove the countersunk bolts from the grille.
The number of countersunk bolts to be removed from XY-122 is 4
and from XY-152 is 6.
(2) Remove the grille from the enclosure.
(3) Reverse the above steps when placing the grille back to the
enclosure. The grille should be placed back in the same orientation
before it was removed.
Note
Qty Service Part No.
1 04X902
M6 x 30mm (P=1.0),
4mm hex socket head,
4 06G020
for grille
Note
Qty Service Part No.
1 04X908
M6 x 30mm (P=1.0),
4mm hex socket head,
6 06G020
for grille
Note
Qty Service Part No.
1 PT-XY122CD1 Include the following items.
4 -
M6, 10mm width across flat
4 -
4 - M6
4 - M6
M6 x 40mm (P=1.0),
8 06G036 4mm hex socket head
for HF waveguide
Note
Qty Service Part No.
1 PT-XY122LF1
M6 x 40mm (P=1.0),
8 06G003
5mm hex socket head
8 06D0075 M6
Note
Qty Service Part No.
1 PT-XY152LF1
M6 x 40mm (P=1.0),
8 06G003
5mm hex socket head
8 06D0075 M6
Required tools
・4mm hex key
Required tools
・4mm hex key
Required tools
・4mm hex key
・10mm spanner
Required tools
・5mm hex key
Required tools
・5mm hex key
NOTE: XY-122 is used in the pictures.