Pioneer XY series Installation Manual page 33

3 Rigging And Caster Setting
__________________________________________________________________________________________________________
(4) Remove the four pre-inserted M10 mounting screws on the rear side of
XY-122/152 enclosure.
(5) Ensure the four commercially-available M10 eyebolts are secured to the
mounting points on the rear side of the XY-122/152 enclosures to
suspend it with wire as a secondary safety feature. (Fig.3-2-4-H)
Fig.3-2-4-G
Combination of Dual Enclosure Flying Plate Set and Variable Angle Bracket
When using the Variable Angle Bracket together with Dual Enclosure Flying
Plate, the 2 enclosures of XY-122/152 stably suspended from the ceiling can be
inclined forward and backward. The angle between the 2 enclosures can be
ranged from 50 degree to 95 degree.
NOTE: All the parts for a combination of Dual Enclosure Flying Plate Set
and Variable Angle Bracket should be compatible with respective
speakers, XY-122 and XY-152.
WARNING:
The Variable Angle Bracket and the Dual Enclosure Flying Plate Set are not
supposed to be used in the following situations, which may cause an injury or
accident.
Not suspending
vertically
Commercially-
available
eyebolt
Suspending
from the wall Over 2 enclosures
Fig.3-2-4-H
NOTE: XY-122 is shown in the illustration.
A deg
A deg
Suspending Unsymmetry
placement
Commercially-
available
eyebolt
To the ceiling
B deg
≠
B deg