Leister Hot-Jet S Operating Instructions

Hot air welding tool

Hide thumbs Also See for Hot-Jet S:

Download this manual

OPERATING INSTRUCTIONS

LEISTER Hot-Jet S

Hot Air Welding Tool

Please read operating instructions carefully

before use and keep for further reference.

APPLICATION

• Soldering and de-soldering of SMD thru-hole components.

• Welding of thermoplastic materials and also single-ply flexible plastics and

modified bitumen in the form of boards, tubes, profiles, lining membranes,

coated materials, films, foams, tiles, and sheets. The following procedures

are possible: overlap welding, welding with rod, with tape and fusion

welding by heat.

• Shrinking of heat-shrink sleeves, films, tapes, solder sleeves and moulded

parts.

• Activating/dissolving of solvent free adhesives and fusion adhesives.

• Drying of water-damp surfaces.

LEISTER Process Technologies, Riedstrasse, CH-6060 Sarnen / Switzerland

Tel. + 41- 41 662 74 74 Fax + 41- 41 662 74 16

www.leister.com

sales@leister.com

Do you have a question about the Hot-Jet S and is the answer not in the manual?

Page 1: Operating Instructions
• Shrinking of heat-shrink sleeves, films, tapes, solder sleeves and moulded parts. • Activating/dissolving of solvent free adhesives and fusion adhesives. • Drying of water-damp surfaces. LEISTER Process Technologies, Riedstrasse, CH-6060 Sarnen / Switzerland www.leister.com sales@leister.com Tel. + 41- 41 662 74 74 Fax + 41- 41 662 74 16...
Page 2 WARNING Danger to life when opening the tool, as live compo- nents and connections ar exposed. Unplug the tool before opening it. Incorrect use of hot air blowers can cause fire and explosion hazard, especially near combustible materials and explosive gases. Do not touch the element housing and nozzle when they are hot as they can cause burns.
Page 3 • If required, earth the tool via the ESD-lead connection. • Switch on (2) and allow to warm up for about 5 min. Operation • The Leister Company, as well as the Service Centres, offer free training courses in all areas of application (see page 1). Change of nozzles •...
Page 4 • Guarantee and liability are in accordance with the guarantee certificate as well as with the currently valid general business and sales conditions. • LEISTER Process Technologies rejects any guarantee claims for tools which are not in their original condition. The tools must never be altered or changed.