Communicating With Others; Disconnecting From The Node Or Room; Various Display Functions; Confirming The Location Of The Local Node And The Partner Station - Yaesu FT2DR Instruction Manual

Communicating with others

1
Press .
The transceiver switches to transmission mode.
2
Speak into [MIC].
Tip Place the microphone about 5 cm away from your mouth when you speak.
Caution Do not continuously transmit over an extended period of time to reduce the risk of
overheating, malfunction, or injury.
3
Release .
The transceiver switches to reception mode.

Disconnecting from the node or room

1
While pressing
2
Press the #99999 (DTMF disconnection command) key.
Disconnects the node or room.

Various display functions

Confirming the location of the local node and the partner station

When the signal from the local node you have connected to contains location
information, you can display the location information on the screen.
Pressing the
screen which displays the name of the partner station as well as the direction and
distance to the partner station from your station. Pressing the [X] key displays the local
node name and the direction and distance to the local node from your station. Pressing
the [X] key again displays the information of the partner station.
Tip
When "NUMERIC" is selected from [DISPLAY]→[1 TARGET LOCATION] in the setting mode, the
latitude & longitude screen appears instead of the compass screen.
Connecting to a Faraway Station Using WIRES-X
touch [DTMF] displayed on the screen.
,
key on any screen of WIRES-X switches the screen to the compass
23