Yaesu FT2DR Instruction Manual page 52

WIRES-X Setting Mode Menus
3
Touch [1 RPT/WIRES FREQ].
Displays the selection items.
4
Rotate the DIAL to select [MANUAL] or [PRESET].
Every time the DIAL is rotated, the setting switches
between [MANUAL] and [PRESET].
MANUAL: Set the frequency every time you look for
a local node.
PRESET: Preset the frequency you use to look for
the local node.
Selecting [PRESET] and pressing the
displays the frequency select screen.
5
Rotate the DIAL to select the frequency you want to
preset.
Tips • Rotating the DIAL changes the frequency by the
increments specified in setting mode.
• Touching [BAND] switches the band of the preset
frequency.
• The default settings are 146.550 for the A-band and
446.550 for the B-band.
6
Press the
Sets the frequency and returns the screen to the
frequency display screen.
key four times.
key
52