Dcs - ZyXEL Communications NWA1000 Series User Manual

The second response your AP can take is to kick the connections that are pushing it over its balanced
bandwidth allotment.
Figure 53 Kicking a Connection
Connections are kicked based on either idle timeout or signal strength. The NWA1000 Series first looks to
see which devices have been idle the longest, then starts kicking them in order of highest idle time. If no
connections are idle, the next criteria the NWA1000 Series analyzes is signal strength. Devices with the
weakest signal strength are kicked first.

10.5 DCS

Use this screen to configure dynamic radio channel selection. Click Configuration > Wireless > DCS to
access this screen.
Figure 54 Configuration > Wireless > DCS
Each field is described in the following table.
Table 37 Configuration > Wireless > DCS
LABEL
Select Now
Chapter 10 Wireless
DESCRIPTION
Click this to have the NWA1000 Series scan for and select an available channel
immediately.
NWA1000 Series User's Guide
87