Vent Termination Clearances - Takagi T-KJr2-IN Installation Manual And Owner's Manual

Clearance above grade, veranda, porch, deck,
A
or balcony.
Clearance to window or door that may be
B
opened.
C Clearance to permanently closed window
Vertical clearance to ventilated soffit located
above the vent terminator within a horizontal
D
distance of 2 feet (61cm) from the center line
of the terminator.
E Clearance to unventilated soffit
Clearance to outside corner
F
Clearance to inside corner
G
Clearance to each side of center line extended
H
above meter/regulator assembly
I Clearance to service regulator vent outlet.
Clearance to non-mechanical air supply inlet
J to building or the combustion air inlet to any
other application.
K Clearance to mechanical air supply inlet.
Clearance above paved sidewalk or paved
L
driveway located on public property.
Clearance under veranda, porch deck, or
M
balcony.
*For clearances not specified in ANSI Z223.1 / NFPA 54 or CAN/CSA-B149.1, please use clearances in accordance with
local installation codes and the requirements of the gas supplier.

-Vent termination clearances-

Direct vent and
other than Direct
15
│
Canada
Direct vent
Vent
1 foot 1 foot
3 feet 1 foot
*
*
*
*
*
3 feet
3 feet
3 feet 1 foot
6 feet 3 feet
7 feet
1 foot
Page
Installation
U.S.A
Other than Direct Vent
1 foot
4 feet from below or side
opening. 1 foot from
above opening.
* *
* *
* *
* *
* *
* *
* *
4 feet from below or side
opening. 1 foot from
above opening.
3 feet
* 7 feet
* *