MAINTENANCE
TAKING A BREAK
Engage gun safety lock.
Turn unit to "OFF" (O) position.
Unplug the power cord from the outlet.
C A U T I O N :
The use of a pump protector is recommended to prevent cold weather damage during storage
over the winter months.
WALL MOUNTING INSTALLATION
Mark a level line on the wall.
Mark the position of the holes on the studs
Mount a desired wall bracket (not included) onto the studs.
After fastening, make sure the wall bracket is level, and securely mounted on the wall.
I M P O R T A N T
DO NOT USE PRESSURE WASHER WHILE IN WALL MOUNTED POSITION
Telescopic handle use:
Pull up and fully extend handle for use.
For transporting, pull as shown.
To lower handle; push handle until it lock into place for storage.
I M P O R T A N T
This handle is for pulling the unit. Do not lift the unit by this handle.
(See Figure 16.)
Fig. 16
(See Figure 17.)
2 3
.
Fig. 17