GreenWorks 51037 Operator's Manual

GreenWorks 51037 Operator's Manual

140 bar / 380 l/h electric pressure washer

Advertisement

Quick Links

140 Bar / 380 L/H
ELECTRIC PRESSURE WASHER
51037
OPERATOR'S MANUAL
Read all safety rules and instructions carefully before operating this tool.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 51037 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for GreenWorks 51037

  • Page 1 140 Bar / 380 L/H ELECTRIC PRESSURE WASHER 51037 OPERATOR’S MANUAL Read all safety rules and instructions carefully before operating this tool.
  • Page 2: Intended Use

    DA NO ENGLISH(Original Instructions) INTENDED USE WARNING: The cleaner is intended only for the cleaning of High pressure jets can be dangerous if subject to vehicles, boats, buildings, etc, by the removal misuse. The jet must not be directed at persons, of stubborn dirt using clean water and chemical animals, electrical devices, or the machine itself.
  • Page 3 DA NO ENGLISH(Original Instructions) WARNING: Before storing, allow the motor to cool. ■ To reduce the risk of electrocution, keep all When servicing use only identical replacement parts. ■ connections dry and off the ground. Do not touch Use of any other parts may create a hazard or cause plug with wet hands.
  • Page 4 DA NO ENGLISH(Original Instructions) SYMBOLS Some of the following symbols may be used on this product. Please study them and learn their meaning. Proper interpretation of these symbols will allow you to operate the product better and safer. SYMBOL NAME DESIGNATION/EXPLANATION Safety Alert Indicates a potential personal injury hazard.
  • Page 5 If you do not under stand the warnings and instructions in the operator’s manual, do not use this product. Call Greenworks Tools customer service for assistance. WARNING: The operation of any power tool can result in Fig.1...
  • Page 6: Product Specifications

    DA NO ENGLISH(Original Instructions) PRODUCT SPECIFICATIONS Maximum Water Temperature ......................Rated Voltage 220-240V ~ 50 Hz ........................Rated Pressure 10.5 MPa ......................... Permissible Pressure 14 MPa ........................Power Rating 1800 W ........................Rated Water Flow 4.6 l/min .......................
  • Page 7: Folding Handle

    S ee Figure 4 ASSEMBLING THE SPRAY WAND Installing Wand to Pressure Washer Gun If in doubt,call Greenworks Tools Customer Service for Insert the male bayonet end(1) of the wand into the assistance. Operation of a product that may have been female bayonet outlet(3)firmly .While pushing in the...
  • Page 8 DA NO ENGLISH(Original Instructions) CONNECTING HIGH PRESSURE HOSE TO TRIGGER (See Figure 5.) HANDLE Align the pressure hose with the trigger handle and push up and into position. (Fig. 5.1) With hose pushed into position on the trigger handle secure in place by turning the hose lock clockwise until fully tightened.
  • Page 9 DA NO ENGLISH(Original Instructions) NOTE: If the pressure washer pulsates and the water C A U T I O N stream is intermittent turn the pressure washer off and Use only approved pressure washer cleaners.Do not continue to bleed air out of the system. Ensure to check use bleach,chlorine,or any cleaners containing acids.
  • Page 10 DA NO ENGLISH(Original Instructions) NOZZLE APPLICATION W A R N I N G Red - Stream nozzle (0° ) The Red 0 degree tip provides a straight line of spray. Hold the trigger handle securely with both hands.Expect It provides the highest amount of pressure. It is best the trigger handle to move when the trigger is pulled due used for removing hard, stuck-on grime or dirt.
  • Page 11 DA NO ENGLISH(Original Instructions)
  • Page 12 ENGLISH(Original Instructions) PR O B LE M P O S S IB LE C AU S E S O LU T IO N Motor will not start. On/Off switch is in the Turn switch to the “ON” “OFF” (O) position. ( | ) position.
  • Page 13 ENGLISH(Original Instructions) PROBLEM POSSIBLE CAUSE SOLUTION Detergent is not coming Select the correct tank, either A Is detergent tank seletor on out. or B. and the correct tank slected? Check connections. Detergent bottle or suction tube not properly connected. Dilute detergent. Detergent is too thick.
  • Page 14 ENGLISH(Original Instructions) PROBLEM POSSIBLE CAUSE SOLUTION Motor buzzes but fails Supply voltage below mini- Verify that only the pressure to run. mum. washer is running on this circuit. System has residual pres- Turn unit “OFF”, squeeze trigger sure. on spray wand to release pres- sure, then turn unit “ON”...
  • Page 15: Limited Warranty

    ENGLISH(Original Instructions) LIMITED WARRANTY LIMITED WARRANTY Warrants this outdoor product to be free of defects in material and workmanship for 24 months from the date of purchase by the original purchaser, subject to the limitations below. Please keep your invoice as proof of date of purchase.
  • Page 16 åtbyggargatan 14 120 68 Stockholm Sweden Herewith we declare that the product Category ....................High Pressure Washer Model ......................51037 Serial number ..................See product rating label Year of Construction ................See product rating label 2006/95/EC (LVD-Directive) 2004/108/EC (EMC-Directive), and And furthermore, we declare that...

Table of Contents