LifeFitness E1 Owner's Manual page 12

p u t -b
owEring p thE otal
Your Life Fitness Total-Body Elliptical Cross-Trainer may come with either a
U.S. power supply or one of several international power supplies. Insert the
appropriate power adapter jack into the connector (C) on the back of the
Total-Body Elliptical Cross-Trainer. Then Insert the plug into the wall outlet.
Make sure the cord is placed so it doesn't bind and will not be walked on.
Then check that the console lights up. If not, recheck the plug and the wall
connections and make sure the wall outlet has power.
p u t -b
owEring p thE otal
Your Life Fitness Total-Body Elliptical Cross-Trainer may come with either a
U.S. line cord or one of several international line cords. Insert the appropri-
ate power adapter jack into the connector (C) on the back of the Total-Body
Elliptical Cross-Trainer. Then insert the plug into the wall outlet. Make sure
the cord is placed so it doesn't bind and will not be walked on. Turn the
power switch to ON. Once the unit is turned on, the cross-trainer's stride
length will auto-calibrate. Wait one minute to allow for the calibration to
complete.
Then check that both the main LCD display and Activity Zone LCD
light up. If not, recheck the plug and wall connections. Make sure the wall
outlet has power. If still not working properly, check the connections made
in E5 Assembly
Instructions.
m m
ounting thE achinE
When mounting the machine it is recommended that the pedal closest to you is in its lowest position. This can be done by
pushing the arms to rotate the pedal until it is centered to the side of you at its lowest position. (E5 ONLY: It is also rec-
ommended that the stride length be set to 18 in. (46 cm.). The pedal is in its lowest position at 18 in. (46 cm)). If you are
standing to the left side of the machine, when facing the console, place your left
foot on the pedal closest to you and then swing your right leg over the right pedal. Use the stationary handlebar to stabi-
lize yourself.
d m
ismounting thE achinE
Bring the machine to a stop. It is recommended to put the pedal in it's lowest position on the side of the unit you will be
dismounting. If dismounting the machine on the left side, when facing the console, step off with the right leg first followed
by the left leg. Use the stationary handlebar for stabilization.
s l d
tridE Ength for iffErEnt
The E5 has seven different stride lengths from 18-24 in. (46 -61 cm.). Users may utilize any of the stride lengths. Re-
search has shown that shorter users may prefer a shorter stride length while taller users may prefer a longer stride length.
10
E c -t
ody lliptical ross rainEr
E c -t
ody lliptical ross rainEr
u (E5 only)
sErs
(E1 & E3 only)
(E5 only)
C
E1/E3
C
E5