SEH myUTN-50a User Manual page 93

Requirements
myUTN User Manual Linux
If a PKCS#12 certificate has already been installed on the UTN
server, it will be overwritten.
 The certificate must be in 'base64' format.
Proceed as follows:
1. Start the myUTN Control Center.
2. Select SECURITY – Certificates.
3. Click PKCS#12 certificate.
4. Click Browse.
5. Enter the PKCS#12 certificate.
6. Enter the password.
7. Click Install.
 The PKCS#12 certificate is saved in the UTN server.
Saving S/MIME Certificates in the UTN Server (only myUTN-80
and later)
S/MIME certificates (*.pem file) are used to sign and encrypt the
emails that are sent by the UTN server.
If a S/MIME certificate has already been installed on the UTN server,
it will be overwritten.
Proceed as follows:
1. Start the myUTN Control Center.
2. Select SECURITY – Certificates.
3. Click S/MIME certificate.
4. Click Browse.
5. Specify the S/MIME certificate.
6. Click Install.
 The S/MIME certificate is saved in the UTN server.
Security
93