SEH myUTN-50a User Manual page 75

Requirements
Requirements
myUTN User Manual Linux
2. Compose the selection list; see: 'How to Add UTN Servers/USB
Devices to the Selection List'
3. Select Program – Options from the menu bar.
The Options dialog appears.
4. Select the Selection List tab.
5. Tick Global selection list.
6. Click OK.
 The setting will be saved. All users of a client use the same
selection list.
Providing User-Specific Selection Lists
 The SEH UTN Manager (complete version) is installed on the
client; see: 20.
 You are logged on to the system as administrator.
Proceed as follows:
1. Start the SEH UTN Manager.
2. Select Program – Options from the menu bar.
The Options dialog appears.
3. Select the Selection List tab.
4. Tick User selection list.
5. Click OK.
 The setting will be saved. Each user uses their own selection list.
The selection lists of the users will be saved as .ini files in
user-specific directories (see: 'User-Specific Selection List'
73).
The administrators share one selection list.
Providing Users with a Predefined Selection List
 The SEH UTN Manager (complete version) is installed on the
client; see: 20.
Working with the SEH UTN Manager
63
.
75