How To Configure Wlan (Myutn-54 Only) - SEH myUTN-50a User Manual

What is WLAN?
Connection Status
WLAN Security
WEP
myUTN User Manual Linux
3.7

How to Configure WLAN (myUTN-54 only)

The UTN server model 'myUTN-54' can handle WLAN. This allows you
to wirelessly operate the UTN server in the network.
WLAN is a radio technology that allows you to establish wireless
connections between network components. The WLAN technology is
defined as a standard of the IEEE 802.11 family. The myUTN-54 sup-
ports the standards IEEE 802.11b, 802.11g and IEEE 802.11n.
To make use of the radio technology the myUTN-54 has additional
parameters 47. You can view the current WLAN settings in the
myUTN Control Center under the menu item NETWORK – WLAN.
The following icons in the myUTN Control Center indicate the cur-
rent connection status:
UTN server in the wireless network
UTN server in the wired network
Make sure that no unauthorized user logs on to the Wireless LAN
and that no one has access to the Internet or network resources.
Your UTN server offers several security mechanisms.
Default
WEP
WEP+EAP
WPA (Personal Mode)
WPA2 (Personal Mode)
WPA (Enterprise Mode)
WPA2 (Enterprise Mode)
WEP (Wired Equivalent Privacy) is an encryption method according to
IEEE 802.11 on the basis of the RC4 encryption algorithm. WEP offers
Mechanism
Encryption
WEP
(Open System / Shared Key)
WEP (Open System)
TKIP/MIC
AES-CCMP
TKIP/MIC
AES-CCMP
Network Settings
Authentication
---
802.1X/EAP
PSK
PSK
802.1X/EAP
802.1X/EAP
44