Page 1
This Quick Installation Guide provides Dieser Quick Installation Guide a description of the installation of the beinhaltet eine Beschreibung myUTN-250. It contains the following Installation myUTN-250. information: erhalten die folgenden Informationen: General Information Allgemeine Information Safety Regulations Sicherheitsvorschriften Hardware Installation...
Page 2
Date of Manufacture The serial number includes the date of manufacture. The serial number can be found on the type plate. Quick Installation Guide...
USB ports of the myUTN-250. The software tool 'SEH UTN Manager' handles the access to the USB devices. The SEH UTN Manager is installed on all clients that are intended to access a USB device in the network. The SEH UTN Manager shows the availability of all UTN servers in the network and establishes a connection between the client and the USB port including the connected USB device.
Technical Data 1) Link LED (green) 2) Activity LED (yellow) 3) Status LED (green) 4) Power LED (yellow) 5) LED for the USB ports 1–3 (green/ orange) Front view 6) Network connector (RJ-45) for 1000BaseT, 100BaseTX and 10BaseT 7) USB ports 1–3 (USB port 1: USB 3.0 SuperSpeed, (USB ports 2 and 3: USB 2.0 Hi-Speed) 8) Reset button...
LED Display The LEDs of the UTN server provide information about its status. Action Color Description Link permanently on green There is a connection to the network. permanently off There is no connection to the network. Activity blinks at irregular yellow Indicates the exchange of network data intervals...
Safety Regulations UTN servers are network devices for use in office environments. The myUTN-250 is designed for the integration of USB devices into TCP/IP networks. Before starting the initial setup procedure and during the operation of the UTN server, please note the following safety regulations. Their purpose is to protect yourself and others from personal injuries, and avoid damage to the equipment.
Hardware Installation You can directly connect up to three USB devices to the UTN server (myUTN-250). clients with the software tool 'SEH UTN Manager' USB 3.0 USB device USB 2.0 USB device USB 2.0 USB device network myUTN-250 Proceed as follows: 1.
A detailed description can be found in the myUTN User Manual. The SEH UTN Manager is installed on all clients that are intended to access a USB device in the network. Different installation files are available, depending on the operating system.
Getting Started: SEH UTN Manager After the SEH UTN Manager is started, the network will be scanned for connected UTN servers. The network range to be scanned is freely definable. All UTN servers found will be shown in the 'network list' together with the connected USB devices.
Starting the SEH UTN Manager Windows Start the SEH UTN Manager on your client via the Windows start menu. (Start All Programs SEH Computertechnik GmbH SEH UTN Manager) In some cases the Windows user account control requires a confirmation if the SEH UTN Manager is to be run.
Assigning an IP Address to the UTN Server Once the UTN server is connected to the network, it checks whether an IP address can be obtained from the boot protocols BOOTP or DHCP. If this is not the case, the UTN server assigns itself an IP address via ZeroConf from the address range (169.254.0.0/16) which is reserved for ZeroConf.
You can extend the search for UTN servers to any network range. To do this, change the search parameters for the network scan. Windows: via the Options dialog in the Program menu. Mac: via the Preferences dialog in the SEH UTN Manager menu. Quick Installation Guide [en]...
Connecting the USB Device to the Client To use a USB device, a connection is established between the client and the USB port of the UTN server to which the USB device is connected. Make sure that: - All provisions (driver installation, etc.) necessary to operate the USB device locally (i.e.
Configuring the UTN Server The UTN server can be configured and monitored via the myUTN Control Center. The myUTN Control Center is stored in the UTN server and can be launched by means of a browser (Internet Explorer, Mozila Firefox, Safari). Proceed as follows: 1.
Die Zugriffsverteilung der USB-Geräte erfolgt über das Software-Tool 'SEH UTN Manager'. Der SEH UTN Manager wird auf allen Clients installiert, die auf ein im Netzwerk bereitgestelltes USB-Gerät zugreifen sollen. Der SEH UTN Manager zeigt die Verfügbarkeit aller im Netzwerk eingebundenen UTN-Server an und stellt die Verbindung zwischen Client und USB-Port inklusive dem daran angeschlossenen USB-Gerät her.
Technische Daten 1) Link-LED (grün) 2) Activity-LED (gelb) 3) Status-LED (grün) 4) Power-LED (gelb) 5) LED für die USB-Ports 1–3 (grün/ orange) Vorderansicht 6) Netzwerkanschluss (RJ-45) für 1000BaseT, 100BaseTX und 10BaseT 7) USB-Ports 1–3 (USB-Port 1: USB 3.0 SuperSpeed, (USB-Port 2 und 3: USB 2.0 Hi-Speed) 8) Reset-Taster 9) Anschluss für die Stromversorgung über das mitgelieferte Netzteil...
LED-Anzeige Durch die Interpretation des LED-Leuchtverhaltens kann der Zustand des UTN- Servers ermittelt werden. Aktion Farbe Beschreibung Link Dauer-An grün Eine Verbindung zum Netzwerk ist vorhanden. Dauer-Aus Es besteht keine Verbindung zum Netzwerk. Activity unregelmäßiges gelb Signalisiert den Austausch von Netzwerk- Blinken Datenpaketen.
Sicherheitsvorschriften UTN-Server sind Netzwerkgeräte für den Gebrauch in Büroumgebungen. Der myUTN-250 dient dem Einbinden von USB-Geräten in TCP/IP-Netzwerken. Beachten Sie vor Inbetriebnahme und beim Betrieb des UTN-Servers die folgenden Sicherheitsvorschriften, um sich und andere vor Personenschäden zu schützen sowie Beschädigungen am Gerät zu vermeiden.
Hardware-Installation Am UTN-Server (myUTN-250) können bis zu drei USB-Geräte direkt angeschlossen werden. Clients mit Software-Tool 'SEH UTN Manager' USB 3.0 USB-Gerät USB 2.0 USB-Gerät USB 2.0 USB-Gerät Netzwerk myUTN-250 Gehen Sie wie folgt vor: 1. Verbinden Sie den UTN-Server und das USB-Gerät mit dem USB-Datenkabel.
Die vollständige Variante verfügt über eine grafische Bedienoberfläche und bietet zusätzliche Funktionen. Detaillierte Beschreibungen finden Sie in der myUTN-Benutzerdokumentation. Der SEH UTN Manager wird auf allen Clients installiert, die auf ein im Netzwerk bereitgestelltes USB-Gerät zugreifen sollen. Je nach Betriebssystem sind verschiedene Installationsdateien verfügbar.
Erste Schritte mit dem SEH UTN Manager Nach dem Start des SEH UTN Managers wird das Netzwerk nach angeschlossenen UTN-Servern gescannt. Der zu scannende Netzwerkbereich ist frei definierbar. Nach dem Scannen des Netzwerks werden alle gefundenen UTN-Server und deren angeschlossene USB-Geräte in der 'Netzwerkliste' angezeigt. Die benötigten UTN-Server werden ausgewählt und der 'Auswahlliste' hinzugefügt.
SEH UTN Manager starten Windows Starten Sie auf Ihrem Client den SEH UTN Manager über das Windows- Startmenü. (Start Alle Programme SEH Computertechnik GmbH SEH UTN Manager) In einigen Fällen verlangt die Windows-Benutzerkontensteuerung eine Bestätigung, wenn der SEH UTN Manager ausgeführt werden soll.
UTN-Server eine IP-Adresse zuweisen Nachdem der UTN-Server an das Netzwerk angeschlossen ist, überprüft der UTN- Server, ob er eine IP-Adresse über die Bootprotokolle BOOTP oder DHCP erhält. Ist das nicht der Fall, gibt sich der UTN-Server über ZeroConf selbst eine IP-Adresse aus dem für ZeroConf reservierten Adressbereich (169.254.0.0/16).
Die Suche nach UTN-Servern kann auf beliebige Netzwerkbereiche erweitert werden. Ändern Sie hierzu die Suchparameter für den Netzwerkscan. Windows: Im Menü Programm über den Dialog Optionen. Mac: Im Menü SEH UTN Manager über den Dialog Einstellungen. Quick Installation Guide [de]...
USB-Gerät mit Client verbinden Um ein USB-Gerät zu nutzen, wird eine Verbindung zwischen dem Client und dem USB-Port des UTN-Servers hergestellt, an den das USB-Gerät angeschlossen ist. Stellen Sie folgende Punkte sicher: - Auf dem Client sind alle Vorbereitungen (Treiberinstallation usw.) getroffen worden, die notwendig wären, um das USB-Gerät lokal (also direkt am Client angeschlossen) zu betreiben.
UTN-Server konfigurieren Über das myUTN Control Center kann der UTN-Server konfiguriert und überwacht werden. Das myUTN Control Center ist in dem UTN-Server gespeichert und kann mit einem Internet-Browser (Internet Explorer, Mozilla Firefox, Safari) aufgerufen werden. Gehen Sie wie folgt vor: 1.
Page 30
The latest version of the EC declaration of conformity can be downloaded from the homepage of SEH Computertechnik GmbH: http://www.seh-technology.com/services/ce-notification.html Quick Installation Guide...
Need help?
Do you have a question about the myUTN-250 and is the answer not in the manual?
Questions and answers