SEH myUTN-50a User Manual page 122

myUTN User Manual Linux
Tabelle 21: Parameter List - TCP port access
Parameters Value
protection on/off
[Port access
control]
protection_test on/off
[Test mode]
protection_level protec_utn
[Security level] protec_tcp
protec_all
ip_filter_on_1 on/off
~
ip_filter_on_8
[IP address]
ip_filter_1 valid IP address
~
ip_filter_8
[IP address]
hw_filter_on_1 on/off
~
hw_filter_on_8
[MAC address]
hw_filter_1 valid hardware
~ address
hw_filter_8
[MAC address]
Appendix - Parameter List
Default Description
off Enables/disables the locking
of the selected ports.
on Enables/disables the test
mode.
The test mode allows you to
test the parameters set using
the access control. If the test
mode is activated, the access
protection remains active until
the UTN server is rebooted.
protec_ Specifies the port types to be
utn locked:
- UTN ports
- TCP ports
- all ports (IP ports)
off Enables/disables an excep-
tion from the port locking.
[blank] Defines elements that are
excluded from port locking,
using the IP address.
off Enables/disables an excep-
tion from the port locking.
00:00:00: Defines elements that are
00:00:00 excluded from port locking,
using the hardware address.
122