Important: Read Before Proceeding! - VPI Scout Jr. Setup And Instruction Manual


Read and follow the INTRODUCTION:

The VPI Scout Jr. is a ready to use out of the box high-end entry level turntable. Complete with a pre-
mounted Ortofon 2M Red cartridge on a 9 inch Gimballed/Yoke bearing, it is the perfect solution to enjoying
your music! The Scout Jr. turntable is a precision instrument thoroughly tested. Besides being
mechanically tested every Scout Jr. is also musically tested using a PS Audio Sprout and KEF Headphones.

Safety Instructions below.

Save all packing materials. The Scout should only be moved or shipped in its original packaging to reduce
the risk of damage in transit.

The Scout must be placed on a flat, level surface. This will make setup easy, provide better sound quality,
and put less strain on the main bearing.
INTRODUCTION:
The VPI Scout Jr. is a ready to use out of the box high-end entry level turntable. Complete with a pre-mounted
Ortofon 2M Red cartridge on a 9 inch Gimballed/Yoke bearing, it is the perfect solution to enjoying your music!
The Scout Jr. turntable is a precision instrument thoroughly tested. Besides being mechanically tested every
Scout Jr. is also musically tested using a PS Audio Sprout and KEF Headphones.
Safety Instructions

To avoid electrical shock, do not open the motor housing.

If the power cord provided with the Scout does not reach an outlet, use a heavy-duty, grounded ext

To avoid electrical shock, always plug the Scout into a grounded outlet.

Do not expose the Scout to rain or excessive moisture.

Do not touch the male pivot point of the tonearm assembly.
Minimum Specifications
Wow and flutter  Less than .02%.

Rumble  Greater than 78db down.

Speed accuracy  Within .1%.

Total weight  32 pounds.

Platter run out  +/- .001 inch.


Important: Read Before Proceeding!

Follow the instructions below to reduce risk of electrical hazard or
injury.
Follow the instructions below to avoid damage to the Scout
It is extremely sharp.