Page 1
THE TNT-6 REFERENCE TURNTABLE (SHOWN WITH JMW-12.6 AND TONEARM BOARD) SETUP AND INSTRUCTION MANUAL VPI INDUSTRIES INC., 77 CLIFFWOOD AVE #3B, CLIFFWOOD N.J. 07721 PHONE: 732-583-6895, FAX: 732-946-8578 www.vpiindustries.com...
Page 2
It cannot be stressed enough that a level base for the TNT- 6 will make set up much easier. It is best to place the TNT-6 on a level surface that measures at least 27 x 2l inches. This will allow room for the optional dust cover if you should want to purchase it.
Page 3
If the motors ever make noise, it is time to re-lube it. There is a break-in period of at least 30 hours before the TNT-6 will sound its best. For best possible sound try to turn on the turntable at least one hour before you do serious listening.
Page 4
30 days of purchase, you are jeopardizing your warrantee. The motor and bearings of the TNT-6 are warranted for 5 years. There is nothing else that can fail on your TNT-6 except the belts, which should be changed every year and...
Need help?
Do you have a question about the THE TNT-6 and is the answer not in the manual?
Questions and answers