Sony PMW-EX3 Operating Instructions Manual page 50

displayed when you mount the "Memory Stick"
or SDHC card.
For a "Memory Stick" or an SDHC card that was
formatted with another system unsupported by
this camcorder, the message "Unsupported File
System" is displayed on the viewfinder screen.
Format the "Memory Stick" or SDHC card as
instructed below.
To execute formatting
Using "Format Media" (page 132) of the
OTHERS menu, specify "Media(A)" (slot
A) or "Media(B)" (slot B) then select
"Execute."
Formatting begins.
An in-progress message and status bar (%) are
displayed, and the ACCESS lamp lights in red.
When formatting is completed, a completion
message is displayed for three seconds.
Note
In formatting, all data in a "Memory Stick" or an
SDHC card including protected images, are
erased and cannot be restored.
Connection between the camcorder and a PC
To use a "Memory Stick" or an SDHC card in
which data have been recorded with an XDCAM
EX-series product, insert it into the slot of the
camcorder and connect between the PC and this
camcorder using a USB cable.
To use media formatted with this camcorder in
the slots of other devices
Make a backup of the media, then format it using
the other device.
• "Memory Stick" and
trademarks of Sony Corporation.
• "Memory Stick PRO-HG Duo" and
Sony Corporation.
• "XQD" is a registered trademark of Sony
Corporation.
50 Using an Media Adaptor
are
are trademarks of