Sony PMW-EX3 Operating Instructions Manual page 159

Warning indication Buzzer
in the viewfinder
1)
Unknown Media(A)
Please Change.
Media Error
1)
Media(A) Needs to be
Restored
Media Error
Cannot Record to
1)
Media(A)
Media Error
1)
Cannot Use Media(A)
Video Format Mismatch
Copy Protected Input
Cannot Record
Media Error
Playback Halted
1)
Media(A) Error
Media Reached
Rewriting Limit
1)
Change Media (A)
Unsupported Clip
Included
1)
Cannot Use Media (A)
2) Intermittent
HDD A Battery Near
End
2) Continuous
HDD A Battery End
1)
(B) for the card in slot B
2)
B for a HDD connected to slot B
Tally Cause and measures
lamps
A partitioned memory card or one that contains recorded clips
exceeding the number permitted with this camcorder is loaded.
This card cannot be used with this camcorder. Remove it and
load a compatible card.
An error occurred with the memory card. The card requires
restoration.
Remove the card, load it again, and restore it.
Recording cannot be done, as the memory card is defective.
As playback may be possible, it is recommended to replace it
with another card after copying the clips, as required.
Neither recording nor playback can be done, as the memory
card is defective.
It cannot be operated with this camcorder. Replace it with
another card.
The external signal input via the i.LINK connection cannot be
recorded, as the Video Format setting is different from the
signal format of the external input signal.
Change "Video Format" of the OTHERS menu to match it to
that of the external signal.
The external signal input via the i.LINK connection cannot be
recorded, as the stream is copy-protected.
Check the input signal.
An error occurred in reading data from the memory card, and
playback cannot be continued.
If this frequently occurs, change the memory card after
copying the clips, as required.
Recording cannot be done, as an error occurred with the
memory card.
If this frequently occurs, change the memory card.
The memory card comes to the end of its service life. Make a
backup copy and replace the card with another one as soon as
possible. Recording/playback may not be performed properly
if you continue to use the card.
For details, refer to the operating instructions of the memory
card.
The inserted memory card cannot be used with this camcorder,
as it contains clips recorded in a format that is not supported
by this camcorder.
Flashing The battery power of the connected HDD will be exhausted
soon.
Change the battery at the earliest opportunity.
Rapidly The battery of the connected HDD is exhausted. Recording
flashing cannot be performed.
Stop operation to change the battery.
Error/Warning Indications 159