Turning Power On; Turning Power Off - Sony PMW-EX3 Operating Instructions Manual

2
Connect the power cord supplied with
the BC-U1/U2 to the AC input
connector of the BC-U1/U2 then to an
AC power source.
3
Set the mode switch of the BC-U1/U2 to
the DC OUT position.
For details, refer to the Operating Instructions of the
BC-U1/U2.
When recording or playback is in progress on
power from the DC IN connector, the input
voltage is displayed in the viewfinder.
DC IN 12.0V STBY
A: 25min
B: 50min
Z99
Note
The battery pack mounted on the camcorder is not
charged even if you set the mode switch of the
BC-U1/U2 to the CHARGE position. To charge
the battery pack, remove it from the camcorder
and mount it on the BC-U1/U2.

Turning Power On

This camcorder has Camera mode for recording
and Media mode for playback.
The mode is selected when you turn the power on.
16 :9 W
ID E SC
RE EN
OF F
ON
2
1
-
FU LL
FR AM
E
+
GA IN
WH ITE
BA L
L BA RS
M ATW
H B
A
PR ST
ST AT
US
ME NU
SE L/S
ET
Power switch
CAMERA OFF MEDIA
To operate in Camera mode, turn the power on by
setting the power switch to the CAMERA
position.
To operate in Media mode, turn the power on by
setting the power switch to the MEDIA position.
S&Q REC
AU TO
/CA M
CA NC
EL

Turning Power Off

Set the power switch to the OFF position.
Notes
• This camcorder uses a little standby power even
when the power switch is set to OFF. Remove
the battery pack if the camcorder will not be
used for a prolonged period.
• Set power to OFF, and after 10 seconds or more,
remove the battery pack/DC IN power.
Damage and malfunction to the camcorder/SxS
memory card may result if not powered off, or
the battery pack/DC IN power is removed soon
after powering off.
Power Supply 29