Sony PMW-EX3 Operating Instructions Manual page 137

message (e.g., for formatting or restoration of
an SxS memory card) is shown on the screen.
It appears when formatting or restoration is
completed.
The message is also not displayed while the
CLIP INFO screen is shown on the screen. It
appears when an operation on the CLIP
INFO screen is completed or you return to
the thumbnail screen.
2
Select "Execute" by operating the jog
dial or the joystick.
The screen displays the following:
USB Connecting
3
With Windows, check that the memory
card is displayed as a removable disk in
My Computer.
With Macintosh, check that a "NO
NAME" or "Untitled" folder was
created on the desktop.
This indicates that the connection is active.
(The folder name on the desktop of the
Macintosh computer can be changed as
needed.)
Note
The following operations must be eliminated
when the access lamp is lit in red.
• Turning the power off or disconnecting the
power cord
• Removing the SxS memory card
• Disconnecting the USB cable
When using the SBAC-US10, refer to the operating
instructions of the SBAC-US10.
Removing an SxS memory card
Windows
1.
Click on the icon of "Safely Remove
Hardware" on the task bar of the computer.
2.
Select "Safely remove SxS Memory Card -
Drive(X:) from the displayed menu.
3.
Check that the Safe To Remove Hardware
message appears then remove the card.
Macintosh
Drag the SxS memory card icon on the desktop to
Trash.
If the SxS memory card icon is located on Finder,
click on the eject icon on its side.
Note
Do not select "Card Power Off" from the SxS
memory card icon displayed on the menu bar.
Using the supplied application software
To copy clips to the local disk of a computer, the
dedicated application software on the supplied
CD-ROM must be used. Install the software to
your computer.
Although the data regarding recorded materials
are stored over multiple files and folders, you can
easily handle the clips without considering such
data and directory structure by using the
dedicated application software.
Note
If you operate, e.g. copy the clips on the SxS
memory card by using the Explorer (Windows) or
Finder (Macintosh), the subsidiary data contained
by the clips may not be maintained. To avoid such
a problem, use the dedicated application software.
For the operating requirements, installation and
operations, refer to the Installation Guide or Help
(User's Guide) contained in the supplied CD-ROM.
For information on the dedicated application
software, visit Sony professional products web site.
Using a nonlinear editing system
For a nonlinear editing system, optional editing
software that corresponds to the recording
formats used with this camcorder is required.
Store the clips to be edited on the HDD of your
computer in advance, using the dedicated
application software (supplied).
Some editing software may not operate properly.
Be sure to confirm before use that it conforms to
the recording formats used with this camcorder.
Operating Clips With a Computer 137