Nmea0183 Format; Transmission Format; Data Format; Jrc Format - JRC JSS-296 Service Manual

(b) Select "Self-ID" using
press .
ENT
(c)
If a Group-ID is assigned, select "Group-ID" using
press .
ENT
(d) Select "Navigation" using
.
press
ENT
ATTENTION
There are two types of navigation data formats, NMEA 0183 and JRC format. For
normal operation, specify NMEA 0183.

NMEA0183 format

(A) Transmission format
Transmission method: Asynchronous
baud rate
Start bit
Data bit
Stop bit
Parity
(B) Data format
GLL : Position data ( Lat / Lon ) and UTC time data
Position data ( Lat / Lon )
ZDA : UTC time data and date ( year, month, day ) data
ZLZ : UTC time data
ZZU : UTC time data
VHW : Water speed and heading data
VTG : Course over ground and ground speed
RMC : Position data ( Lat / Lon ), UTC time data,
and ( year, month, day ) data

JRC format

(A) Transmission format
Transmission method: Asynchronous
baud rate
Start bit
Data bit
Stop bit
Parity
(B) Data format
"F" or "D" +80H : Position ( Lat / Lon ), date ( year, month, day ) data and time data, "@"
+80H.
Note
If a time difference is set on JRC format navigation equipment, local time, not UTC
time, is output. Set the time difference to zero or use the NMEA0183 format.
(e) Select "Serial cont" using
FUNC
(f) Press
(saved) and the "DSC watching" display returns. This completes the operation setting.
FUNC
Press
Note
▼ ▲
/ , input the Self-ID (9-digit) using the number keys and
▼ ▲
/ , specify the navigation data format using
: 4800bps
: 1bit
: 8bit
: 1bit
: None
: 1200bps
: 1bit
: 8bit
: 2bit
: None
▼ ▲
/ , specify "ON" using
9
and then (SAVE). The contents of the settings are written to memory
and then 4 (QUIT) to cancel the set contents and end the setting operation.
▼
/ ▲ , input the Group-ID (8-digit) and
(IEC61162-1)
(NMEA Version 1.5)
(IEC61162-1)
(NMEA Version 1.5)
(NMEA Version 1.5)
(IEC61162-1)
(IEC61162-1)
(IEC61162-1)
/ and press
/ and
.
ENT
55