JRC JSS-296 Service Manual page 198

2. Group Name Registration for User Channel
200 user channels are separated into 10 groups, 20 channels each, for scanning reception and labels are
available for easy selection. Follow the steps below to register a group name.
Procedure
(a) Select the MENU number 8 by the jog dial or keypad.
MENU Turn the jog dial
or
8
MENU
(b) Select the group number with the jog dial, and then
ENT
press
(c) Input the group name.
"_ (Space)" blinks in the LCD.
If the group label is not required, press the
and complete the registration.
Select an alphabet or number with the jog dial or
keypad, and press
After complete the registration, go to step (b) for
further registration or press
registration mode.
ENT
ENT
.
ENT
or CLR
CLR
to exit the
GRP MEMo
RX FREQ
RDY
TX FREQ
GRoUP
RX FREQ
RDY
TX FREQ
_
ENT
RX FREQ
RDY
TX FREQ
to set it.
SSB GRP_
RX FREQ
RDY
TX FREQ
8/23
Attached documents 2 (2)
8
4,200.0
kHz AGC
4,500.0
kHz
1 1
4,200.0
kHz AGC
4,500.0
kHz
1
4,200.0
kHz AGC
4,500.0
kHz
1
4,200.0
kHz AGC
4,500.0
kHz