Harrie Leenders DORAN Instructions For Installation Manual page 23

Harrie Leenders Doran ­ Instructions for Installation, Use and Maintenance
11. Placing the front panel for stove with rear outlet
Position the front panel against the top head.
Be careful not to cause any damage: first place the
upper part, then the lower part against it.
13. Air supplied through floor or wall
Open the small door in the base.
Place the cover plate in the base against the hole of
the air supply box.
Fix the cover plate using the four socket­head
screws.
Cut the air pipe to length.
12. Adjusting the front panel for stove with rear outlet
The fasteners at the bottom become accessible by
turning the stove.
Fix the front panel using 4 countersunk M6 screws
(no. 1).
Use the four adjusting screws (no. 2) to adjust the
height of the front panel so as to be equal to the
surrounding decorative part.
Firmly tighten the countersunk screws (no. 1).
Then place the top plate on the stove.
23