Harrie Leenders Doran Instructions for Installation, Use and Maintenance
General instructions and regulations
The installation of the Doran with decorative casing must be carried out by a skilled
person employed by a dealer recognized by Harrie Leenders Haardkachels.
The casing parts are susceptible to scratching. Handle them gently.
After the stove has been properly installed, burn some kindling wood to check the
draught.
Please Note, the Doran has been tested by the manufacturers on a 3m straight flue.
Safety recommendations
Glass tends to break easily, and broken glass is quite sharp. Therefore take adequate
safety precautions.
For general safety, we refer to guidelines or regulations issued by a relevant official body
Materials and tools required
Crosshead screwdriver
·
Box spanner set
·
Hexagonal wrench set
·
Masonry bits
·
Knife
·
Plumb line
·
Sliding pieces
·
Spirit level
·
Sack truck
·
Single walled flue pipe and accessories
·
Materials included
Top plate with or without a hole for top or rear outlet
·
Right angled bend ( rear outlet only )
·
4 self tapping screws 3.5 x 9.5 ( +2 spares )
·
19