Table of Contents
Advertisement
Harrie Leenders Doran Instructions for Installation, Use and Maintenance
1. Removing the packaging material
Carefully remove the packaging material (without
damaging the paint). Leave plastic cover wrapped
around the stove.
Open the lower door and unscrew the stove from
the pallet.
Then, push the loose bolts out of the pallet.
3. Positioning the stove
When air is supplied through the floor or wall, first
take the appropriate measures.
See instructions below.
Place the sliding pieces under the feet of the stove
(4x). Carefully push the stove in its correct position.
Allow for the minimum distance to flammable
materials.
Then remove the plastic protective cover and the
sliding pieces.
2. Moving the stove
Put a cushion or blanket between the sack truck
and the stove.
Place the stove on the sacktruck, its left side
resting against the sack truck.
Caution: not the side of the door!
Then move the stove to the place of installation
desired.
4. Installing duct material on top outlet
First place the top plate on the top head.
Fix the wall or ceiling plate (if applicable).
Connect the duct material.
20
Advertisement
Table of Contents
