Table of Contents
Advertisement
Harrie Leenders Doran Instructions for Installation, Use and Maintenance
9. Placing the front panel for stove with top outlet
Position the front panel against the top plate.
Be careful not to cause any damage: first place
the upper part, then the lower part against it.
10. Adjusting the front panel for stove with top outlet
The fasteners at the top become accessible by
turning the top plate carefully to the left and then to
the right (without damaging the paint). The fasteners
at the bottom become accessible by turning the
stove.
Fix the front panel using 4 countersunk M6 screws
(no. 1)
Use the four adjusting screws (no. 2) to adjust the
height of the front panel so as to be equal to the
surrounding decorative part.
Firmly tighten the countersunk screws (no. 1).
Then place the top plate properly in the centre.
22
Advertisement
Table of Contents
