Solar collector fittings kits
These are all the components for plumbing and mounting collectors on the roof.
included
•
all Plumbing Fittings
•
air release Valve
•
Hot Sensor Temperature Pocket
•
15 m of Hot Sensor Lead
•
angled mounting rails for Panels
•
Straps
•
m5 Fasteners (guide stoppers for panels)
Hot outlet connection
The rinnai standard mounting rails are for arrangements where the hot outlet connection is
on the top right hand corner. if you have an arrangement that requires a top left hot outlet
connection you will need a different top mounting rail. This can be purchased as an accessory
from rinnai.
Stainless steel straps for tile roofs
G12 requires stainless steel straps for tile roofs. The Split System Solar Fittings Kits have
galvanised straps as standard. if collectors are being installed on a tile roof, stainless steel
straps can be purchased as an accessory item.
Example of the solar collector fittings for a two solar collector installation
rinnai new Zealand Limited
not included (to be supplied by the installer)
•
mounting Fasteners
E-Frost Solar Collector Split System
7
install manual: 11497-a