mounting collectors on the roof - general
▪
Pipe
connections
between
▪
collector and
tank
▪
Hot collectors
WARNING
rinnai new Zealand Limited
Connecting pipes should pitch up continuously from the tank to the
collector to prevent air-locking
insulation should be of a suitable material to withstand high
temperatures in solar systems and be protected with UV resistant tape
or other coating
maximum total flow and return pipe length between cylinder and
collector is 50 m
The surface and frames can become extremely hot. Collectors should be
kept covered while handling and suitable protective clothing including
gloves must be used to prevent burns.
Keep collectors covered until commissioning and leak testing of the
system is complete.
14
E-Frost Solar Collector Split System
install manual: 11497-a