Mounting the solar controller and pump
1.
mount the solar controller in a suitable position on the side of the cylinder or adjacent wall
using suitable fasteners.
2.
Change position of the riser tube to solar enable the Hotflo storage cylinder using the dip
tube provided in the tank fittings kit.
- Select which upper hot outlet will be used for the hot solar return
- invert the riser tube using the wire tool supplied
3.
Fit the plumbing fittings as shown below and in the drawing on the back of the fittings kit
rinnai new Zealand Limited
11
E-Frost Solar Collector Split System
install manual: 11497-a