INSTALLATION OF SOLAR COLLECTORS & CYLINDERS
STANDARD INSTALLATION
Cylinder Mounting Component Pre Assembly for a Standard Installation
This installation is not suitable for use in cyclonic areas. For further details, please
contact your local Rinnai Solar distributor.
NOTE
•
Assemble the cylinder cradle components and the lower collector rail components as shown in
Figure 10.
•
Only loosely attach the collector retainers to the rails.
MOUNTING RAIL
COLLECTOR RETAINERS
M6 BOLT, NUT &WASHER
Rinnai Australia
COLLECTOR SUPPORT STRAPS
COLLECTOR RETAINERS
M6 BOLT, NUT &WASHER
COLLECTOR SUPPORT STRAPS
Figure 10 - Cylinder Mounting
- 19 -
MOUNTING RAIL
Solar Close Coupled Operating / Installation Manual Issue 7 - 16/9/10