Signaling Relations Setup; Channel Scan Skip; Tx Off; Battery Save Setup - Alinco DJ-A11 Instruction Manual

PRESET OPERATIONS

Signaling Relations Setup

Users can set relations between CTCSS/DCS signal and DTMF signal by programming software.
AND: Only when a matching CTCSS/DCS signal and a DTMF signal are received, can calling of other
party be heard.
OR: As long as a matching CTCSS/DCS signal or a DTMF signal is received, calling of the other party
can be heard.

Channel Scan Skip

Users can choose whether to set current channel as Scan Skip by programming software.
Transceiver will skip current channel during scan when it is set as Scan Skip.

TX OFF

Once this function is enabled, [PTT] key becomes invalid and it works only as a receiver.

Battery Save Setup

This function prevents useless battery consumption by switching the power ON/OFF at a fixed ratio
if there is no key operation or receiving signal for a continuous period of 5 seconds or more. Higher
OFF time (1:4 setting) saves more amount of battery but may cause slight delay on receiving. The
Battery Save function is temporarily suspended when a key is operated or a signal is received.
24
Professional
FM Transceiver