Group Selection; Receiving; Transmitting - Alinco DJ-A11 Instruction Manual

BASIC OPERATIONS

Group Selection

By PC-preprogramming, 128 channels can be assigned in total which are divided into 8 groups
with 16 channels in each group. If different groups are being programmed, press and hold [PF2] to
turn on. Still holding [PF2] for another 2 seconds, it will announce the current group number. Turn
the selector knob to choose the desired group. The voice announce will tell you the selected group
number.
NOTE: You can enable or disable the group selection function by programming software.

Receiving

When the channel you are operating is called, LED GREEN lights, then you hear the voice from
transmitting party.
NOTE: If your transceiver has set higher squelch level or being programmed with signaling features, it
may fail to hear the calling.

Transmitting

Press and release the [PF2] key to monitor for a while to confirm the channel desired is not busy.
Press and hold [PTT] key to speak into microphone (MIC). Keep the distance of about 2.5~5cm
between your lips and MIC, and speak at normal voice level.
NOTE: Press [PTT] key, red is lit indicating it is transmitting. Release PTT to receive.
14
Professional
FM Transceiver