Step 3: Add Laundry Supplies; Step 4: Set Fabric Selector/Wash Temperature (°C); Step 5: Set Soil Level - Jim Chookagian NF3L Installation & Operation Manual

Step 3: Add Laundry Supplies

Open dispenser drawer. Measure and add low sudsing,
high efficiency (HE) detergent (1), bleach (2) and
fabric softener (3) to the dispenser drawer (refer to
Figure 21). Close dispenser drawer.
IMPORTANT: If using a non-HE detergent, avoid
oversudsing by using 1/2 of the detergent
manufacturer's recommended amount.
1 Detergent
2 Bleach
3 Fabric Softener
Figure 21
CAUTION
Dispenser drawer requires a special tool
for removal. Contact a service person if
removal is necessary.
803623 (EN)
3
1
2
FLW2234N
FLW2234N
© Published by permission of the copyright owner – DO NOT COPY or TRANSMIT
Step 4: Set Fabric Selector/Wash
Temperature (°C)
Push touchpad for desired cycle. Light indicates
selection.
FLW21R
FLW22R
FLW23R
FLW24R
FLW25R
FLW26R
NOTE: Changes can be made to Fabric Selector
setting up until the first fill is complete.

Step 5: Set Soil Level

Push Soil Level touchpad to select A, B or C. Light
W236
indicates selection.
.
FLW27R
Operation
NORMAL 90
NORMAL 60
NORMAL 40
PERM PRESS 60
DELICATES 30
DELICATES COLD
(temperature of water from tap)
SOIL LEVEL
21